Disk contents:  

* B-DOS15     - B-DOS 1.5a by Edwin Blink
* B-DOS17     - B-DOS 1.7d Same as B-DOS 1.5a, but with
                Audio-CD & CD-ROM support.

* BDOSInfo    - Info on B-DOS 1.5 from Edwin Blink. Read it!
  BDOSInfo.T  - text file

  font        - code file

* Auto        - Megaboot v2.3 programmed by me. B-DOS is required.
		This one = 100% machinecode!
  ROM         - Spectrum ROM. Only required if want to load 48k
                Snapshots using Megaboot.
  Snaps       - Basic program needed for snapshots.

* DriveInfo   - Gives information about your drive. Notice that the
		READ DEVICE command now returns the current values
		instead of the default values used by the drive.
		This means the state of the drive (locked/unlocked)
		and current CD-speed are now reported correctly.
  medium      - code file

* info	      - After a file has been loaded from CD-ROM drive some info
		about the file is copied to the system page (page0 at 19280).
		This program displays this file information.

* MegaReadme  - Load this one for info on Megaboot.
  MegaRead.S  - text file

* CD-Player   - Simple basic program for playing Audio-CD's.
                Just have a look inside the BASIC...
		Only works with B-DOS 1.6e or higher.

* HDBoot      - Info on how to install Edwin's HD BOOT ROM.
  HDboot.T    - text file

* MakeBoot    - Customize the bootsector of your harddisk...
  MakeBoot.C  - code file
  MakeBoot.T  - text file

* Formatter   - Harddisk format program by Edwin Blink.
* Backup, HD2disk, Mover, Findfree: more useful utilities from
  Edwin Blink.

* Waveplayer  - Loads & plays wavefiles from Samdisk, MS-DOS
                disk or Harddisk. F9 selects another record.
                Key '-' = go back one record
                Key '+' = advance one record
  playcode    - code file

* MS-DOS      - copies files from MS-DOS disk to SAM disk or
                current harddisk record. When the program starts
                you must first select a record to copy to. Keys:
                F1: directory of MS-DOS disk
                F2: change source drive
                F3: change destination drive.
                F4: copies all files from MS-DOS disk (always
                drive 1) to destination drive.
                F7: copy complete MS-DOS disk.
                F8: copy complete SAM disk.
                F9: select record.
                mouse: pressing left button loads a file.
                pressing right button saves a file.
                keyboard: SPACE loads a file.
                SHIFT saves a file.
  MS Code     - code file

* MSDos->HD   - Basic prog that copies MS-DOS disks to B-DOS
                harddisk records. My Waveplayer, ZX81 Emulator
                and ZX48 Emulator can handle these records.

* SAM81       - ZX81 Emulator v2.6 (I think...)
  ZX81 SCR    - code file
  ZX81 CODE1  - code file
  ZX81 CODE2  - code file 
  ZX81 ROM    - code file
  ZX81 HELP   - code file
  ZX81 DOS    - code file

* ZX81 Info   - ZX81 Emulator manual.
  zxtext      - text file

* Slow        - Converts ZX81 programs from tape to TAP files.
  Loader      - code file

* SPECTRUM    - ZX48 Spectrum 48k Emulator v3.4
		Improved CD-ROM drive code.
  ZX CODE     - code file
  ZX ROM      - code file
  ZX HELP     - code file
  ZX SCR      - code file

* SpecReadme  - ZX48 Emulator manual.
  spec        - text file

* Jetpac      - .SNA file
* BombJack    -  Snapshot 48k
* Dizzy2      - .TAP file
* Stimpy      - .Z80 file
* Rockraid    - .SP  file
* opthnder    - .SLT file

* Hyperboot

* Have fun!!!

* Martijn Groen